Nokia C5 Security Test Failed 100% Successful ok

Nokia C5 Security Test Failed Before Work

Phone type: RM-645 (Nokia C5-00)
SW version: V ICPR82_11w16.4 02-06-11 RM-645 (c) Nokia
ApeCoreSw: 071.005
Imei plain: 35375207819206-2
Product code: 0593545
Battery voltage: 3765 mV, current: 192 mA
Language Pack:
– not available.

SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !

SIMLOCK seems to be valid
SUPERDONGLE_KEY[MX] seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed

Imei net: 353752078192062
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

C5 Security

1.  Firstly Click Load From File and select PM File   C5_RM-645_without120,308.pm.

2.  Go to PM View then Tick  only 1 and 309 and Deselect All.

3.  Click Repair SD then Software repaired  file.

Check Info Confirm

4.  Click PMM Auth then Software access SX4 server Compile PM File.

5.  After Click Write and Done.

———————————————————————–

Nokia C5 Security Test Failed Ok After Work

Phone type: RM-645 (Nokia C5-00)
SW version: V ICPR82_11w16.4 02-06-11 RM-645 (c) Nokia
ApeCoreSw: 071.005
Imei plain: 35375207819206-2
Product code: 0593545
Battery voltage: 3765 mV, current: 192 mA
Language Pack:
– not available.

SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !

SIMLOCK seems to be valid
SUPERDONGLE_KEY[MX] seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed

Imei net: 353752078192062
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

FULL FACTORY… OK
USER DATA… OK
LEAVE FACTORY… OK
SERVICE CENTER… OK
SOFTWARE UPGRADE… OK
PRODUCTION TUNING… OK
Reset User Code (to default:12345) … OK
Completed in 1.744 s

 

Leave a Reply